The post office have now made adjustments to allow shipping to the USA once again.
Any items now sent to the USA will have a 10% tariff surcharge added, along with a slight increase in postage (as the Royal Mail charge an extra 50 pence for paying the tariff on your behalf)
At least I can send items to the United States again, even if it means the overall price you pay has increased.
One of the members of UKVAC (Aaron) put together a piece of test gear that allows you to visually check the signals on an IC whilst the board is running normally and I picked one up earlier this year as it can do a few things that the ABI Board master cannot. Having sourced a…
After some experimenting with layouts / shipping and generally learning to use it, the Store is now live and ready to use. I’ve only put a few PCBs on there for the moment and until the next delivery there isn’t many of those available yet. More items will appear once I have finished sorting the…
One of the users discovered a minor problem with the Fluke pod converter PCB which causes problems mainly when used on Zaccaria pinball PCBs. It seems I missed one of the tracks off from the original article that connects the INTACK signal to GND. This has been fixed on the latest PCBs, but if you…
I fondly remember playing games like Confidential Mission on my Dreamcast in the games room, displayed on a 26″ Hantarex screen that came out of a video conference room. However, with the switch of TVs and monitors to LCD / OLED etc, these old guns no longer work. After doing some browsing across several web…
One of the reasons I wanted to build a Retro Chip Tester (RCT) was because there are several adapters available that let you extend the capability of it. The one I had an immediate use for was the 2708 programming adapter. I ordered some PCBs for this, put it together and it has now been…
I have finished moving the remaining pages from the old Frontpage website over to WordPress and put some of the archive history back in. I did have to modify a few things to make it more ‘mobile’ friendly so all pages should be viewable on your phone. (a few require you to rotate your phone…